Ted Stumpf
Ted Stumpf, Windermere Napa Valley PropertiesPhone: (707) 246-9825
Email: [email protected]

How to Get Rid of Stains in Hardwood

by Ted Stumpf 07/26/2020

Post

Photo by Pixabay via Pexels

One of the benefits of hardwood floors is their durability. When they start to look worn, refinishing takes time, but is much less of a hassle than replacement. Yet sometimes, stains won't simply buff out of the surface of your hardwoods. If you’re dealing with tough stains, like juice or wine spills or ink stains, and need to prep your hardwoods for new finish, bleaching is the answer. Whether you bleach the entire floor and refinish it or simply bleach the area with the stain, this process is not difficult and can restore the look of your beautiful floors. Here’s what you need to do.

Step 1 – Prep the Floor

Sand the floor to remove the finish, using a chemical stripper if necessary. You need to remove all of the finish for the bleach to soak in well.

Step 2 – Mix the Bleach

Oxalic acid crystals, which you can purchase at a hardware store, are the best material to use for bleaching hardwood. Mix these crystals into water until no more crystals dissolve. This will take some trial and error, and hot water works best. Be sure to use gloves to protect your skin.

Step 3 – Apply the Bleach

Use rubber gloves, safety goggles and a respirator mask, then grab a sponge and apply the solution on to the stain. Allow it to dry completely. Apply a second application if needed to completely eliminate the stain. Wash off all of the bleach crystals that remain with clean water.

Step 4 – Neutralize

Make a solution by mixing two heaping tablespoons of baking soda and a quart of water. Apply this to the wood to neutralize the bleaching solution, and allow the area to dry.

Step 5 – Refinish

Once you are sure the stain is gone and the wood is dry, refinish the floors as you see fit. If you only bleached part of your floor, take some sandpaper and sand the area, fading the edges of the repaired area to the edges of the rest of the floor. Then, find a matching stain and refinish the area you treated.

Whether you are getting a house ready to stage for sale, have purchased a home and discovered hardwoods under the carpet that need a little TLC, or simply want your existing home to look its best, bleaching the hardwoods is often the best way to get rid of stubborn stains. Before you assume that your stained hardwoods have to be replaced, consider trying this easy DIY solution.

About the Author
Author

Ted Stumpf

Ted draws energy and joy from building synergetic relationships with his Clients. Ted's nature is graciously gregarious and persevering; he's honest; and he's been dedicated to a substantial list of clientele throughout his 25 years in the hospitality business and almost two years as a REALTOR. His passion is creating a sincere, successful relationship with people.

Ted grew up in a family of Realtors in central Indiana, earned a degree in economics and philosophy from the University of Notre Dame, and jumped into all aspects of the restaurant business. His ensuing hospitality career path eventually led him into the Event Management Sales & Service role in hotels and quickly guided him to Los Angeles, San Francisco, and finally to a luxury resort in the Napa Valley, where he, his husband, and their dog have resided for almost a decade now.  

The irony is not lost on Ted that his ‘growth’ journey has culminated in“living happily ever after” in an agricultural area with a small-town feel and sense of community strikingly reminiscent of his youth…and as a REALTOR nonetheless!